1. Pull drawer into the “open” position.

2. Locate drawer slide hardware on the underside of the drawer.

3. Towards the front of each drawer slide is a small plastic gray tab.

4. Slide the tab back to raise the height of the drawer; slide the tab forward to lower the height of the drawer. Tip: lift the drawer gently to make it easier to slide the tab.

5. Be sure to raise both the right and left sides, as necessary. If you are raising the height of the bottom drawer, you may also need to raise the height of the drawers above it, until all three fit correctly.

6. It is NOT necessary to remove a drawer from it’s slide in order to adjust it’s height. However, if for any reason you do need to remove the drawer from it’s slide, squeeze the plastic orange mechanism and lift up gently on the drawer.