ACM-3
Type Large 2 micron ribbon
Polar pattern Figure 8
Sensitivity -53db (0db=1v/pa)
Frequency response 30 to 18000 Hz
Impedance 200 ohms
Recommended load impedance 1000 ohms
Max SPL (1% THD @ 1000Hz) : 137db
Equivalent noise level to IEC 268-4 (A weighted) : 17db
Comes with velvet lined wood case
Comes with a mic holder
ACM-2
ACM-6801T
ACM-6802T
Type Tube Condenser
Capsule size
Frequency response 20-20000Hz
Polar pattern 6801-T cardioid-- 6802-T 9 position
Sensitivity 20mv/Pa
Impedance 200 ohms
S/N Ratio 78db (Ref. Pa A-weighted)
Equivalent Noise Level 13db (A-weighted IEC 268-4)
Max SPL for 0.5% THD 135db
Tube type 12AT7 (removable, not hard-wired)
Power requirements dedicated PSU
Size 60mm X 180mm
Weight 690g
Finish Black satin/gold
comes with PSU, Windscreen, cable, and Flight case
Elastic shock mount is now included
ACM-1
Polar pattern Fig 8
Sensitivity -57db (0db=1V/Pa)
Frequency response 30 t0 18,000 Hz
Impedance<= 250 ohms
Recommended load impedance 1,000 ohms
Max SPL (1% THD @ 1000 Hz) 137db
Equivalent noise level to IEC 268-4 (A weighted) 17db
Comes with bag, XLR cord
ACM-4
Type double 2 micron ribbon
polar pattern fig. 8
Sensitivity -53db (0db=1V/pa)
Frequency response 30 to 18,000 Hz
Impedance <=200 ohms
Recommended load impedance 1,000 ohms
Max SPL (1% THD @ 1,000 Hz) 137db
Equivalent noise level to IEC 268-4 (A weighted) 17db
Comes with wood case, shock mount
ACM-583 FET
Capsule size 32mm
Has Low frequency roll-off (hi-pass filter) a 10db att switch and polar patt switch
Mic only (No case etc)
RIBBON MIC
ribbon 2 micron
polar pattern fig 8
sensitivity -53 db (0 db= 1 V /Pa)
Frequency response 40 to 18,000Hz
Impedance <=200 ohms
Recommended load impedance 1000 ohms
Max SPL (1% THD @ 1000Hz) 137db
Equivalent noise level to IEC 268-4 (A weighted) 17db
Size 30mm X 160mm
includes wood case
ACM-100
TRANSISTER CONDENSER MICROPHONE
CAPSULE SIZE-----------------------1 inch
POLAR PATTERN-------------------CARDIOID
FREQUENCY RESPONSE-------- 20Hz - 20KHz
SENSITIVITY -------------------------(@ 1000Hz. 94db SPL)--10mV/PA
RATED IMPEDANCE---------------200 ohms
EQUIVALENT NOISE LEVEL-----18db (A weight IEC 651)
MAX SPL FOR 0.5% THO @ 1000Hz--128db
POWER REQUIREMENT----------48v
ACM-200
PHANTOM POWERED DOUBLE RIBBON MICROPHONE
FREQUENCY RESPONSE--------------------------30-15000 Hz
POLAR PATTERN-------------------------------------FIGURE 8
SENSITIVITY-------------------------------------------- -30db
RATED IMPEDANCE----------------------------------50 Ohms
MAX SPL (for 1% THO @ 1000 Hz): -------------135db
ACM-900
TUBE RIBBON MICROPHONE
FREQUENCY RESPONSE------------------------30-15000Hz
POLAR PATTERN-----------------------------------FIG 8
SENSITIVITY----------------------------------------- -37db
RATED IMPEDANDE-------------------------------200 Ohms
MAX SPL (for 1% THO @1000 Hz)-------------138db
Comes with power supply, 7 pin mic cable, shock mount and aluminum flight case
ACM-1200
Tube condenser mic
has pad and low-pass filter
Polar pattern--------------------------------------------9 positions from omni to fig 8
Sensitivity: (@1000 Hz 94db SPL)----------------20mV/Pa
Rated impedance--------------------------------------200 ohms
Equivalent Noise Level-------------------------------18db (A weight IEC 651)
Max SPL for 0.5% THO @ 1000 Hz--------------134db
ACM-70
Ribbon mic
Polar pattern-----------------Fig.8
Frequency Response------30Hz-18KHz
Sensitivity---------------------2mV/Pa
Rated Impedance-----------600 ohms
Equivalent Noise Level----18db (A weight IEC/651)
Max SPL for 0.5% THO @ 1000 Hz------142 db